Ten Thousandths Of An Inch

How Practice You Write 10 Thousands Of An Inch?

xviii

18 Answers

Put very simply, you would write ten thousandth of an inch as 0.10. It can also be written as a fraction: 10/1000. In that location is often a great bargain of confusion when information technology comes to dealing with 'tenths' of inches. The exact decimal length of all measurements tends to vary slightly depending on which context you are referring to. People frequently become confused because those who piece of work in engineering and machinery have a slightly different mode of saying 1 x thousandth of an inch.
0.0100 is referred to equally ten thousandth of an inch, all the same, machinists ofttimes refer to 0.0001 every bit a tenth. Some other reason people get confused is because they refer to ten thousandth of an inch as ane 10 thousandth of an inch which is 0.0001. Traditionally a "tenth" of an inch is 0.1, which is right for those of you who do non work in technology. In manufacturing, a "tenth" is .0001" or one-ten thousandths of an inch which is shortened to a "10th" for ease of referencing.
The American organisation of measurement, the Royal system, ofttimes called the Standard English language Measurement (SEM) is based on dividing any unit of measure in half instead of dividing a unit of measurement of measure by ten which is done in the metric system. The Majestic System commonly works with fractions just these can be converted into decimals but can only be broken down every bit small every bit 60 fourths.
If you lot hear ten thousandth of an inch being said and are confused equally to what they are referring to, then put information technology into context and think almost it logically. A newsreader who is quoting how much rain a State going through a drought has received is not going to mean one 'tenth' to be 0.0001 inches. It is all about switching the two slightly different meanings to suit the situation.

There is always confusion when dealing with a "tenth" of an inch.  In manufacturing and measurement where virtually all measurements are expressed in "thousandths" and sometimes mils (equal to .001" to misfile even more).

Traditionaly a "10th" of an inch is 0.1"
In manufacturing a "tenth" is .0001" or one-10 thousandths of an inch.  It is shortened to  a "tenth"

Where as:
0.100  is i hundred thousandths (of an inch)
0.010 is ten thousandths (of an inch)
0.001 is ane thousandths (of an inch)
0.0001 is one-tenth of a thousandths or what a machinists or mechanical engineer would say "one tenth" for short.

You need to empathise who you are talking to and the context of the chat.  The weather man will say that "nosotros received a "tenth" of an inch of rain last night".  He is proverb nosotros received 0.1" of rain not .0001" of pelting.

Cracking answer!  The previous answer trail has been pretty funny to read the mis-understanding of this topic.  If I may expand more I'll show how the naming convention changes as digits move to the left.  Please follow the progression from the bottom-upward on the list beneath:

i.0000
0.9000  is 900-thousandths
0.1000  is 100-thousandths  (i hundred thousandths)
0.0900 is  90-thousandths (ninety thousandths)
0.0100 is 10-thousandths  (10 thousandths)
0.0090 is 9-thousandths (9 thousandths)
0.0010 is 10-x thousandths OR one thousandths
0.0009 is 9-ten thousandths
0.0001 is i-ten thousandths OR i-10th is your a machinist

Put simply without any explanation one ten-thousands of an inch is written as .010

The American arrangement of measurement is the is based on dividing any unit of measure in half as opposed to dividing a unit of measure by ten as in the metric organization.  The American system of measurement was originally chosen the Imperial measurement system also known as Standard English Measure (SEM)  now known equally SAE later on the Guild of Automotive Engineers. The American arrangement is fractional in nature and can be cleaved into every bit many decimal places as desired but is generally just broken downwardly as far as sixty-fourths.

The American system can be defined by dividing the numerator in one-half equally follows.

One inch = 1.000 or  1"
one half = .500 or 1/ii"
one quarter =.250 or ane/4"
one 8th = .125 or i/8"
one sixteenth = .0625 0r 1/16"
i thirtysecond = .03125 or one/32"
1 sixty fourth = .015625 or i/64"

hence any object can be defined by multiplying the numerator. The american Monetary system is a prime number example.
Ane Dollar = $1.00
iii quarters = $ .75
One-half Dollar = $.fifty
one quarter =  $.25
1 dime = $.10
one Nickle =.05
i penny = .01

Let's exist a piddling more precise. Your question is silly and has no answer merely here are answers to two similar questions.
Ten thousands of inches is written 10,000-inch.
Ten thousandths of an inch is written .010-inch.

ane/yard = .001
x/g = .010

one/10,000 = .0001

Your respond would be .010

(1) ten thousandth = 0.0001
(2) 10 thousandths = 0.0002

.001 is 1 thousandth and .0001 is one ten thousandth. What you wrote and the number you gave exercise not correspond is all. You wrote .0010 and the number you showed was .0001.

.oooo1...=100,000ths

.0001...= 10,000ths

.001 =ane,000ths

.01= 100th

.1= 1 tenth

Just utilize the metric system and exist done with it

Read the number backwards and ignore the decimal point.

For example, 0.1 backwards and ignoring the decimal is x. Add together a "th".

0.01 backwards and ignoring the decimal = 100. Add a "th". One hundredTH

0.000001 backwards and ignoring the decimal = 1 000 000. Add the thursday. One millionTH

If:
0.100 is 1 tenth
0.010 is 1 hundredth
0.001 is one thousandth
0.010 is ten thousandths   (aforementioned equally i hundredth)

1 inch or 1 divided by ten,000 = .0001   simple

1/8 inches in decimal point

.0001 is 1- ten thousands..  .0010   is 10 thousands of an inch. Period.lol   .010  information technology 100 thousands of an inch,   ane 10 g is equal as well 2.54 microns.. 1 micron is the size of a molecule.

.010 ( the "0" of the ten is in the ten - thousandth place)

Answer Question

Ten Thousandths Of An Inch,

Source: https://education.blurtit.com/203233/how-do-you-write-ten-thousands-of-an-inch

Posted by: perezhersend.blogspot.com

Share this post