How To Turn On Awd Nissan Rogue

Nissan Rogue Owners Manual: Intelligent 4WD (if so equipped)

4X4–I SYSTEM Operation

Warning

•  Do not drive beyond the performance capability of the tires. Accelerating quickly, abrupt steering maneuvers or sudden braking may crusade loss of control, even with Intelligent 4WD engaged.
•  For 4WD equipped vehicles, practise not endeavour to enhance ii wheels off the footing and shift the transmission to any drive or reverse position with the engine running.

  Doing then may result in drivetrain damage or unexpected vehicle movement which could result in serious personal injury or vehicle damage.

•  Exercise not try to test an 4WD equipped vehicle on a 2-bike dynamometer (such as the dynamometers used past some states for emissions testing) or similar equipment even if the other 2 wheels are raised off the basis. Make sure that yous inform the examination facility personnel that your vehicle is equipped with 4WD before it is placed on a dynamometer.

  Using the wrong test equipment may result in drivetrain damage or unexpected vehicle motion which could event in serious personal injury or vehicle damage.

Caution

•  Do not operate the engine on a free roller when any of the wheels are raised.
•  If you utilize the gratis roller, rotate 4 wheels with the aforementioned speed without raising whatsoever wheels.
•  If an 4WD warning message is displayed while driving there may be a malfunction in the 4WD system. Reduce the vehicle speed immediately and take your vehicle checked by an NISSAN dealer as shortly as possible.
• If the 4WD high temperature message is displayed while you are driving, pull off the road in a safe expanse, and idle the engine. The driving mode will change to 2WD to foreclose the 4WD arrangement from malfunctioning. If the warning message turns off, yous can drive again.
•  If the tire size incorrect bulletin is displayed while yous are driving, pull off the route in a condom surface area with the engine idling. Check that all tire sizes are the same, that the tire pressure level is correct and that the tires are not excessively worn.
•  If a warning message continues to be displayed after the to a higher place operations, take your vehicle checked by an NISSAN dealer as shortly every bit possible.

4WD shift switch

The 4WD system is used to select the 2WD, AUTO or LOCK way depending on the driving conditions.

Turn the 4WD way switch, located on the center console, to select 2WD, Auto, or LOCK.

•  2WD – Turn the 4WD style switch to the 2WD position. The 2WD indicator light in the vehicle information brandish illuminates.
•  AUTO – Turn the 4WD style switch to the neutral (Motorcar) position. The 4WD Motorcar indicator calorie-free in the vehicle information display illuminates.
•  LOCK – To appoint the LOCK manner, turn the 4WD manner switch to the LOCK position.

  The switch will return to the AUTO position automatically and the 4WD LOCK indicator light in the vehicle information brandish illuminates. To disengage the LOCK mode, turn the switch to the LOCK position again. The switch will render to the AUTO position automatically, and the 4WD LOCK indicator light turns into the Automobile indicator low-cal. The LOCK mode will automatically be cancelled when the ignition switch is turned to the "OFF" position.

4WD mode	Wheels driven	4WD mode indicator calorie-free	Use condi
2WD	Front but – This manner is used when driving on a normal road *i	2WD	For driving on dry paved roads.
AUTO	Distribution of torque to the front and rear wheels changes automatically depending on route conditions encountered. This results in improved driving stability.	AUTO	For driving on paved or slippery roads.
LOCK	iv-Cycle Bulldoze *2 *iii	LOCK	For driving on rough roads.

*1 The 2WD way may change to the 4WD mode automatically depending on the driving weather condition.
*2 The LOCK way will change to the Automobile fashion automatically when the vehicle has been driven at a high speed. The 4WD LOCK indicator light turns into the AUTO indicator light.
*3 The LOCK manner will automatically exist cancelled when the ignition switch is turned to the OFF position.

4WD shift tips

•  If the 4WD way switch is operated while making a turn, accelerating or decelerating, or if the ignition switch is turned off while in the Machine or LOCK mode, you may feel a jolt. This is normal.
•  The oil temperature of power railroad train parts will increment if the vehicle is continuously operated under atmospheric condition where the divergence between the front and rear wheels is large (wheel slip), such every bit when driving the vehicle on rough roads through sand or mud or when freeing a stuck vehicle. In these cases, the 4WD mode changes to the 2WD fashion to protect the powertrain parts.
•  Brake altitude in the 4WD mode is the same as 2WD.

CAUTION

•  Depending on the driving condition, the 4WD mode may automatically alter from 2WD to 4WD even when the 2WD manner is selected. If this occurs while driving, the 4WD manner indicator light will not illuminate.
•  Do not get-go the engine with the 4WD fashion switch in any style in the following cases:

•  when the vehicle is placed on a freeroller or jacking up the vehicle with the front tires raised and the rear tires on the ground.
•  when towing the vehicle with the rear tires raised from the basis.

•  Operate the 4WD mode switch simply when driving straight. Do not operate the 4WD mode switch when making a turn or backing up.
•  Do not operate the 4WD fashion switch with the front wheel spinning.
•  Engine idling speed is high while warming up the engine. Be specially careful when starting or driving on slippery surfaces with the 4WD way switch set in the Motorcar mode.

4WD manner indicator lights

The 2WD, 4WD AUTO and LOCK mode indicator lights are located in the vehicle information display.

The 4WD mode indicator lights will display the manner selected by the 4WD fashion switch while the engine is running.

The 4WD AUTO indicator light illuminates when selecting the Machine way.

The 4WD LOCK indicator low-cal illuminates when selecting the LOCKmode and the2WDindicator light illuminates when selecting the 2WD mode.

Fuel efficient driving tips

Follow these like shooting fish in a barrel-to-utilise Fuel Efficient Driving Tips to assist you accomplish the virtually fuel economy from your vehicle.  Use Smooth Accelerator and Brake Pedal Awarding  Avoid rap ...

Parking/parking on hills

Parking/parking on hills WARNING  Do not stop or park the vehicle over flammable materials such every bit dry grass, waste newspaper or rags. They may ignite and cause a burn. ...

Other materials:

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Trouble Diagnosis Flow Nautical chart Trouble Diagnosis Procedure INTERVIEW WITH CUSTOMER Interview with the customer is important to detect the root cause of CAN communication organization errors and to empathise vehicle condition and symptoms for proper trouble diagnosis ...

Bones inspection
DIAGNOSIS AND REPAIR Piece of work Catamenia Piece of work Flow OVERALL SEQUENCE DETAILED Catamenia 1.Go INFORMATION FOR SYMPTOM  Get detailed information from the client nearly the symptom (the status and the environs when the incident/malfunction occurs).  Check functioning condition of the ...

PDC Park Distance Control
Principle Park Distance Command (PDC) helps with parking. Audio-visual and visual warnings signal obstacles in front of or backside the vehicle. Depending on the equipment version: obstacles that are detected by the side ultrasonic sensors may also exist reported past the side protection. General information ...

© 2014-2023 Copyright www.nirogue.com

Source: https://www.nirogue.com/intelligent_4wd_if_so_equipped_-205.html

Share this post